NOTE Before you start, make sure you are using the correct Sonos app — there are two now, and they are not interchangeable. We have a guide to that here.
Since Sonos announced that it will be dropping support for its Bridge (among other things), many users have wondered where that leaves them and their setups. The quick answer to this question is, "Don't worry, everything is going to be fine." This guide will explain how to transition away from the Bridge in favor of one of the newer configurations that Sonos offers.
When Sonos first hit the market, the Bridge was a necessary part of its ecosystem, providing a . . . well, a bridge between your home network and the company's speakers and zone players. Although the Bridge still works -- and although it will until May 2020 at least -- it is no longer mandatory. Nowadays, Sonos users have two alternative options, neither of which involves a Bridge. They can either (a) use one of their non-Bridge Sonos products as a "virtual" bridge, by wiring it into their network and allowing it to communicate directly with the other Sonos units, or (b) connect all their Sonos products directly to their Wi-Fi.
Per Sonos's advice, users should:
Use a wired setup if your home WiFi network is slow, unreliable or does not reach all the rooms where you want Sonos.
Use a wireless setup if your home has a good WiFi network that reaches all the rooms where you want Sonos.
The option you choose will depend on your particular setup and the details of your home network.
That said . . .
ABW: Always Be Wiring
Here at The Home of the Future, we are big fans of using wired connections wherever possible. Which means that, however incredible your Wi-Fi is, we’d still strongly recommend choosing the wired option if you can. In addition to providing a more stable connection, this arrangement has the distinct advantage of requiring less work to set up. If you’ve been using a Bridge up until now, your Sonos system already knows which speakers and zone players should be attached to it, which means that the simple act of connecting one of them to your router (either directly, or via a switch) will complete the transfer automatically.
Or, put another way: If you are currently using a Sonos Bridge, all you need to do in order to switch to a wired setup without that Bridge is to unplug the cable that is running into the Bridge and plug it into one of the speakers or zone units within your system. That’s it. The newly wired in speaker will do the job the Bridge once did, and everything will work perfectly.
Yeah, but . . .
If you can’t do that, or would prefer not to do that, or have kick-ass, blanket-coverage, blazin’-fast Wi-Fi that you’re just desperate to show off, then you can choose the second option and connect all your Sonos products directly to your Wi-Fi network.
To achieve this, you’ll still have to connect one of your speakers to your network with an ethernet cable, but, unlike with the first option, you’ll be able to unplug that ethernet cable once the setup is complete.
Temporarily connect one of your Sonos units to your router
On the back of each Sonos unit there is an ethernet (RJ45) port. Connect one end of your ethernet cable to that port, and connect the other end to one of the ports on your router or switch.
Hand off the connection to your Wi-Fi
Open the Sonos app on your phone or tablet and navigate to
Choose your Wi-Fi network from the list provided. When prompted, enter the password for your wireless network.
Once the app has confirmed that you are connected, unplug the ethernet cable from the back of the unit you used for setup.
Now, all your Sonos units should be directly connected to your Wi-Fi.